Lifting And Transporting; Lifting The Machine - Husqvarna CRT 48-35L Operator's Manual

Lifting and Transporting

3 Lifting and Transporting
3.1

Lifting the Machine

Background The machine is equipped with fork lift pockets (a) on the front and back, and two
lifting tubes (b).
Requirements ■ Lifting equipment (crane, hoist, or fork truck) capable of supporting the
machine's weight
■ Lifting devices (hooks, chains, and shackles) capable of supporting the
machines' weight
■ Machine stopped
Lifting the Perform the procedure below to lift the machine.
machine
1. Attach a sling or chain through the lifting tubes or use a fork lift. Do not attach
lifting devices to any other part of the machine.
2. Lift the machine a small distance.
WARNING
Crushing hazard. An unstable machine may cause the lifting devices and
equipment to fail. You may be crushed if the lifting devices and equipment fail.
► Check for stability before continuing.
3. Check for stability. If necessary, lower the machine, reposition the lifting devices,
and lift the machine a small distance again.
4. Continue lifting the machine only when it is stable.
b b
a
wc_gr013203
32
CRT48
wc_tx004192gb_FM10.fm