Full Duplex - Planet FSD-1020 Manual

3-20
available. The speed and duplex will be decided by the result of the
negotiation. By contrast, if either the speed or duplex is selected, the
AUTO-NEGO function will not work. It forces the port to run in the mode just
set.
All settings will be saved in the EEPROM.
Setting the port speed forces the port to use the selected speed only, if the
device it is contacting is set at a different speed, the data will not be sent. By
default, Auto-Negotiation is set, and the port will negotiate to the fastest speed
available to both ports.
If the port being contacted doesn't have Auto Negotiate, then this port
must be configured to the same as the other port.
PORT
SETTING
→
→10BASE-T
→PORT SEL→
→100BASE-T
→AUTO-NEGO

→FULL DUPLEX

→HALF DUPLEX
→CUT THROUGH
→STORE FWD
→ENABLE
Operation
PLANET Desktop Switch