Planet FSD-1020 Manual page 37

3-18
Changing the system setting to Standard Mode from the Main Menu:
UNIT CONFIG>BUFFER MODE><STANDARD>Press and Hold Enter
Client Server Mode shown in Fig. 3.10 illustrates memory allocation favoring
ports 1~3.
Figure 3.10 Client ServerMode.
Changing the system setting to Client Server Mode from the Main:
UNIT CONFIG>BUFFER MODE><CLIENT SRVR>Press and Hold
Enter
Peer to Peer Mode shown in Fig. 3.11 illustrates memory allocation favoring
ports 1~6.
Figure 3.9 Standard Mode.
Operation
PLANET Desktop Switch