Planet FSD-1020 Manual page 11

1-6
While a menu item is displayed, press the Enter Key to make the selection, or
go to the next level. As you go down the levels, the BACK item can be selected
to go up one level while the MAIN MENU item will go directly to the highest
level.
In case you get lost somewhere in the tree, do not touch any key for 15 minutes
and the console will jump back to Utilization in the Main Menu. You can start
over from the beginning.
In the PORT SETTING and UNIT CONFIG, every selection can only be
made by pressing and holding the ENTER Key, for about 0.5 seconds until a
flashing star shown.
This is to prevent the user from accidentally configuring wrong settings.
Notice that settings that are preceded with an "*" are the current default
settings. After making new settings, the "*" will change to the setting just
made and will become the new current default.
Port Indicators: Showing the activity of ports such as link up, link down,
TX/RX, enabled or disabled.
They also show if a port is disabled by illuminating the frame
Figure 1.7 The Mini Console.
Introduction
PLANET Desktop Switch