Operation
Exiting the Menu Tree
To Exit a Sub-Menu cycle through each item until a "MAIN MENU" or
"BACK" is displayed in the Message Zone, press Enter to make the selection
to return previous menu level.
Observing Network Traffic
The network manager may want to see the traffic load for every segment and
try to balance the load. It is easy to do so with Desktop Switch FSD-1020 by
selecting the UTILIZATION item. While the item is selected, the level of
Utilization for the enabled ports goes up and down as the traffic load varies.
The system stays at UTILIZATION most of the time. For example, the system
will return to UTILIZATION from other menus if the keys are not touched for
a period 15 minutes.
The reference for the level of utilization is based on the speed of the port that
is running. For example, a port that is running in 10M half duplex, the 100%
stands for the bandwidth of 10M. Following table show the relation for each
speed:
SPEED
10M half duplex
10M full duplex
100M half duplex
100M full duplex
FSD-1020 User's Manual
100% Stands for:
10M
20M
100M
200M
3-9