Tools Required - True TBR Series Installation Manual

TRUE
TBR | TDR SERIES
SERVICING & REPLACEMENT COMPONENTS
• Component parts shall be replaced with OEM (original
equipment manufacturer) components.
• Unplug the refrigerator/freezer before cleaning or making any
repairs. Setting temperature controls to the 0 position or
powering off an electronic control may not remove power
from all components (for example; light circuits, perimeter
heaters, evaporator fans, etc.).
• Servicing shall be done by a licensed service provider to
minimize the risk of possible ignition due to incorrect parts or
improper service, and to ensure operator's health and safety.
SWING DOOR GASKET REPLACEMENT

TOOLS REQUIRED

• Caulk gun
• Black 100% silicone
There are two types of door gaskets available; narrow and wide
gaskets. Depending on the age and model number you have, you
will have to pick the correct gasket. These are not interchangeable
(see image 1).
Narrow door gasket
A.
Wide door gasket
B.
– From the upper right or left-hand corner, carefully pull
STEP 1
removable gasket away from the door. (see image 2).
On the narrow gaskets it's important to remember which
NOTE:
track the gasket was removed from. Normally, the gasket
is in the center track on top, bottom, and handle side.
On the hinge side it is on the inside track.
26
1
2
truemfg.com