Cabinet Setup - True TBR Series Installation Manual

TRUE
TBR | TDR SERIES

CABINET SETUP

STANDARD ACCESSORIES
SHELF INSTALLATION:
Hook shelf clips onto shelf standards.
1.
Position all four shelf clips equal in distance from the floor
2.
for flat shelves.
Shelves are oriented so that cross support bars are facing
3.
down.
Place shelves on shelf clips, making sure all corners are
4.
seated properly.
WARNING!
Do not use pliers or any crimping tools
when installing shelf clips. Altering shelf
clips in any way can lead to shelving
instability.
8
FOR PROPER SHELF CLIP INSTALLATION PLEASE
READ THE FOLLOWING INSTRUCTIONS.
– Install the top tab of the shelf clip into the proper hole.
STEP 1
Push up on the bottom of the clip. (see image 1).
– Bottom tab of the shelf clip will fit tightly. You may need
STEP 2
to squeeze or twist the bottom of the shelf clip to install.
(see images 2 & 3).
– After installation, the shelf clip will fit snugly into the shelf
STEP 3
standard. The shelf clip should not be loose or able to wiggle out
of the shelf standard. (see image 4).
SHELF INSTALLATION TIPS
Install all the shelf clips before installing the shelves.
1.
Start at the bottom in terms of shelf installation and work
2.
your way up.
. Always lay the back of each shelf down on the rear clips
3
before the front.
1
Installing top tab of shelf clip
3
You may need to squeeze or twist the
bottom of the shelf clip to install
truemfg.com
2
Installing bottom of the shelf clip
4
Shelf clip installation complete