Important Warranty Information - True TBR Series Installation Manual

TRUE
TBR | TDR SERIES
MAINTENANCE, CARE & CLEANING
– Remove the two bolts securing the condensing base
STEP 6
to the cabinet.
– Remove the brackets covering the left and right side
STEP 7
of the condenser coil.
– Carefully slide the condensing unit out (tube
STEP 8
connections are flexible). Proceed to gently blow through the
coil with compressed air or CO2 until clean. Carefully vacuum
any dirt around and behind the condensing unit area.
– Carefully slide the compressor assembly back into
STEP 9
position and replace bolts. Reattach brackets on left and right
side of condensing coil.
• Reinstall louvered grill.
• Connect unit to power and verify operation.

IMPORTANT WARRANTY INFORMATION

• Condensers coils accumulate dirt and require cleaning
every 30 days. Dirty condensers result in compressor failure,
product loss, and lost sales, which are not covered by
warranty.
• If you keep the condenser clean you will minimize your
service expense and lower your electrical costs. The
condenser requires scheduled cleaning every thirty days
or as needed.
• Air is pulled through the condenser continuously, along
with dust, lint, grease, etc.
• A dirty condenser can result in
part and compressor failures, product loss, and lost sales.
• Proper cleaning involves removing dust from the condenser
by using a soft brush, vacuuming the condenser with a shop
vac, or using CO2, nitrogen, or pressurized air.
• On most units, the condenser is accessible by removing
the cabinet's outer grill cover. The condenser coil is a heat
exchanger and is used to transfer heat like a car radiator.
You must be able to see through the condenser for the unit
to function at maximum capacity. Do not place filter material
in front of condensing coil, as this material blocks air-flow to
the coil in a way similar to a dirty coil.
• If you cannot remove the dirt adequately, please contact
your licensed refrigeration service provider
THE CLEANING OF THE CONDENSER IS
NOT COVERED BY THE WARRANTY!
If you have any questions, please call TRUE Manufacturing at
or
636-240-2400 800-325-6152
Department.
Direct to Service Department:
Service Department availability:
Monday-Thursday 7:00 a.m. to 7:00 p.m., CST
Friday 7:00 a.m. to 6:00 p.m. CST
and Saturday 8:00 a.m. to 12:00 p.m. CST.
20
NON-WARRANTEED
and ask for the Service
1-855-372-1368
(CONT.)
6
7
8
truemfg.com