Kit Contents - True TBR Series Installation Manual

TRUE
TBR | TDR SERIES
CABINET ADJUSTMENTS
SWING DOOR OPERATION – REVERSE
DOOR SWING
REVERSING THE DOOR SWING: (shipped with cabinet)

KIT CONTENTS:

• Door stop bracket
• Bottom hinge bracket
• Top hinge bracket
• Door cam base and riser
• Top hinge bushing
REQUIRED TOOLS:
• Phillips screwdriver
• 5/16" socket wrench
• Flat blade screwdriver
Example shown is a left hinge door changing to a right hinge door.
Any cabinet adjustments are to be made
NOTE:
cabinet has been verified level and supported properly.
1
Locate the bolts securing the top hinge bracket to the front of the
cabinet base. Remove the bolts.
2
With the bolts removed, swing the bracket onto the door. Tilt the top
of the door out to provide clearance from the countertop. Lift up on the
door to disengage it from the top hinge bracket.
For additional maintenance instruction, please visit the media center at
22
3
Remove the bottom hinge assembly from the cabinet.
the
AFTER
4
5
All door hardware will
need to be removed,
except for the door handle.
Top hinge bracket
and shaft
Top hinge bushing
Door bracket
Door bracket
Door cam riser
Door stop bracket
Components not on the
door but included in the
assembly.
Door cam base
Bottom hinge bracket
and shaft
TRUEMFG.COM
truemfg.com