Maintenance, Care & Cleaning - True TBR Series Installation Manual

Hide thumbs Also See for TBR Series:
Table of Contents

Advertisement

TRUE
TBR | TDR SERIES
MAINTENANCE, CARE & CLEANING
CLEANING INSTRUCTIONS FOR DRAFT TOWERS
BEER TAP CLEANING KIT
REQUIRED TOOLS
BLC SYSTEM
CLEANER
PUMP BOTTLE
& TUBE
1
2
3
18
Draft dispensers, regardless of design, must be cleaned on a regular
basis. Flushing your draft dispenser with water only is not enough.
Cleaning is recommended whenever changing to a fresh keg.
NOTE: USE CL E ANERS APPROV ED BY YOUR BEER SUPPLIER
AND FOL LOW THEIR INSTRUCTIONS. IF YOU ARE USING THE
BRUSH
CL E ANING K IT PURCHA SED FROM TRUE FOL LOW THESE
SPANNER
INSTRUCTIONS:
WRENCH
RUBBER GASKET
Cleanliness should be constantly maintained in your dispenser so that
your draft beer will be at its best when served. Although the beer in
the barrel is in excellent condition, it can become less satisfying as it
is drawn through the beer line and faucet if they are not kept clean.
PREPARE SOLUTION:
Add 1/2 ounce (19 grams) of cleaning solution to each quart of warm
water. Fill pump bottle with the mixed cleaning solution.
BUCKET &
FRESH WATER
BEER CLEANING INSTRUCTIONS:
RUBBER
GASKET
10. Rinse bucket, pump bottle and hose thoroughly with
11. Fill pump bottle with clean cool water and pump through
12. When crystal clear water comes through, you're ready
1. Shut-off the CO
at the regulator.
2
2. Remove the tapping device (keg coupler) from the keg.
3. Unscrew handle from faucet.
4. Remove beer faucet with spanner wrench
(turn clockwise to remove) (figure 1).
5. Put tap and faucet parts in a bucket.
6. Thread hose from pump bottle to beer column tap outlet
(be sure rubber gasket is in place to prevent leakage)
– allow beer line to drain in bucket (figure 2).
7. Pump solution from bottle through the beer line(s) into the bucket.
Wait 10 minutes while cleaning solution works through the lines.
8. Use supplied brush to clean beer faucet parts (figure 3).
9. Rinse parts thoroughly.
clean cool water.
lines until water runs clear (repeat if necessary).
to assemble and reattach faucet and re-tap the keg.
truemfg.com
205343
REV. 1 - 10.12.16 SB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents