Panel Descriptions - Roland VR-50HD MK II Startup Manual

Panel Descriptions

Top Panel
Audio Mixer Section
(Input channels 1–11/12, MAIN bus)
1
[GAIN] knobs
Adjust the gain (sensitivity) of the audio that is being input from the
AUDIO IN 1–4 jacks.
2
[SELECT] buttons
Accesses a menu screen related to audio input and output.
3
[SOLO] buttons
Turn the solo function on/off. When this is on (lit), you can use the
headphones to monitor the pre-fader audio.
* The audio for which the solo function is on can also be output from the
AUX 2/MONITOR OUT jacks.
4
Level meters
Indicate the input level.
5
[MUTE] buttons
Turn the mute function on/off. When this is on (lit), the audio is
temporarily silenced.
6
Audio faders
Adjust the input level.
7
[MIC 5 GAIN] [MIC 7 GAIN] knobs
Adjust the input gain (sensitivity) of the mic connected to the MIC 5
or MIC 7 jack.
8
SIG/PEAK indicator
Indicates the output level of the USB audio. When the output level
exceeds -48 dB, this is lit green. When output overload occurs, this is
lit red.
9
[USB AUDIO] knob
Adjusts the output level of the USB audio.
10
[PHONES] knob
Adjusts the volume of the headphones.
11
INPUT indicators
Indicator Explanation
MIC
LINE
Indicates the audio source that is currently selected.
VIDEO
When the audio follow function is on, this indicates the
output status of the audio.
Lit green
FOLLOW Lit red
Blinking red Audio is being faded-in/out.
* Audio follow is a function that automatically switches
the audio output in tandem with video switching.
12
MAIN level meter
Indicates the output level.
13
[MAIN] fader
Adjusts the output level.
2
Audio is not being output.
Audio is being output.
23
1
2
3
4
5
6
24
Video Mixer Section
14
MONITOR
Here you can switch the monitor display. The selected button is lit.
[MULTI-VIEW] button
Shows a list of the input/output video and the loaded still images.
[INPUT] button
Shows the input videos in four quarters of the screen.
[STILL] button
Shows the loaded still images in four quarters of the screen.
[PGM] button
Shows the program output video.
15
TRANSITION
[CUT] [MIX] [WIPE] buttons
Select video transition effects. The selected button is lit.
[TIME] knob
Adjusts the video transition time.
16
[FREEZE/USER LOGO] button
Turns the freeze function (freeze the output video) on/off. When on,
the button is lit.
* You can also assign the user logo function (output a still image) to the
[FREEZE/USER LOGO] button.
17
[OUTPUT FADE] button
The program output video and audio fade in/out.
Button Status
Lit Fade out completed
Blinking Fading in/out
Unlit
Normal output
18
AUX [1]–[4] [PinP] [PinP/KEY] [PGM] buttons
Select the video that is sent to the AUX bus. The selected button is lit.
7 8 9 10
11 12
13