Xerox MF Series Technical Document page 58

D2
SUBJECT: P
Tools
• Phillips screwdriver.
Preliminary steps
• None.
Disassembly
• Stand at the back of the fax.
Side blade spring
Slide plate
• Press the control panel opening lever.
• Press outwards on the latch and release the stop.
• Hold the separator assembly while removing the mounting screw. Remove the assembly.
Assembly
• Visually inspect the new parts.
• Put the new parts in place on the control panel in the following order: slide plate, separator
plate, center blade spring, side blade spring and fixing plate. Make sure the parts are oriented
correctly. Insert the mounting screw, screw it in and tighten it.
• Press on the latch (see D1) and close the control panel, letting the stop lock behind the latch.
- 10 -
APER SEPARATOR
MG 252 787 467 - A
Mounting screw
Fixing plate
Center blade
spring
Separator plate