Xerox MF Series Technical Document page 57

D1
SUBJECT: W
1/1
Tools
• None.
Preliminary steps
• None.
Disassembly
• Stand at the back of the fax.
Opening limiter
White roller
B
• Press the control panel opening lever.
• Press outwards on the latch and release the stop.
• Press outwards on the latch, hold and extract the white roller.
• Remove and keep the pinion and the bearings.
Assembly
• Unpack the new white roller and inspect it visually. Fit the bearings and pinion on the new
roller.
• Place the equipped white roller in end housing B, oriented the same way as during disassembly.
• Press on the latch and place the other end of the white roller in end housing A.
• Press on the latch and close the control panel, letting the stop lock behind the latch.
- 9 -
HITE ROLLER
White roller end housings
MG 252 787 467 - A
A
Latch
Stop