SCSI IDs and Bay Locations
The following figures show the SCSI bay locations for the IntelliStation POWER 9114 Model 275 .
Index
1
2
3
4
5
6
7
8
Notes:
1. The SCSI bus IDs are the recommended values and indicate how the IDs are set when the system is
shipped from the factory. Field installations might not comply with these recommendations.
2. One disk drive backplane is standard in the IntelliStation POWER 9114 Model 275 ; a second
backplane can be added. In the figure above, the system is shown fully populated with two backplanes
and four disk drives.
3. Media bay location Index 2 is designed to house one of the following optional devices:
v IDE Optical Drive
v Diskette Drive
Any SCSI device used in media bay location Index 4 must be connected to a PCI SCSI adapter.
68
IntelliStation POWER 9114 Model 275 Parts Guide
Drive Name
Operator Panel
Diskette Drive
or IDE Optical Drive
IDE CD-ROM (Default)
or IDE DVD-ROM (Optional)
Tape Drive (Optional)
SCSI DVD-RAM (Optional)
Disk Drive 1
Disk Drive 2
Disk Drive 3
Disk Drive 4
SCSI ID
(U0.1-P1-X1/Q6-A1, for optical drive)
IDE (Non-SCSI)
(U0.1-P1-X1/Q6-A0)
SCSI ID 0
SCSI ID 1
SCSI Bus 0
SCSI ID 3
SCSI ID 4
SCSI ID 5
SCSI ID 8