Power Supply Locations - IBM IntelliStation POWER 9114 Model 275 Manual To The Installation

Power Supply Locations

Each power supply has three LEDs. The amber LED on the power supply indicates a problem with the
power supply. If a power supply is diagnosed with a cooling problem, the entire power supply must be
replaced.
1 Primary Power Supply V2
2 Redundant Power Supply V1
3 Power Supply Filler (Required in
place of redundant power supply)
1
5
2
6
7
3
4
4 System Unit (In Service Position)
5 Fault LED (Amber)
6 DC Good LED (Green)
7 AC Good LED (Green)
Appendix C. System Locations
61