IBM IntelliStation POWER 9114 Model 275 Manual To The Installation page 26

10. Lift the black tab attached to the adapter retainer assembly, and keep the black tab in a vertical
position.
1 System Unit
2 Adapter Retainer Assembly
3 Adapter Retainer Assembly (retainer seat
down and the locking latch in the locked
position)
4 Adapter Retainer Assembly (retainer seat
down and the locking latch in the unlocked
position)
11. Carefully grasp the PCI adapter by its top edge or upper corners, and remove it from the system.
Store the adapter in a safe place.
12. If you are removing a PCI adapter as part of another procedure, return to that procedure. If not,
continue to the next step.
13. If you do not plan to install another adapter into the vacated slot, seal the expansion slot using an
expansion-slot cover. If you are installing another adapter, go to "Replacing or Installing a
Non-Hot-Pluggable PCI Adapter" on page 15.
14. If you have another option to install, refer to the procedures for that option. If you do not have other
options to install, continue to the next step.
15. Connect the adapter cables.
16. Replace the service access cover as described in "Replacing the Service Access Cover" on page 9.
17. Reconnect the power source to the system.
18. Return the system to the operating position as described in "Placing the Model 275 into the Service
and Operating Position" on page 6.
14
IntelliStation POWER 9114 Model 275 Parts Guide
6
2
7
3
4
5
1
5 PCI adapter faceplate (dotted lines)
6 Adapter Retainer Assembly (in the unlocked
position)
7 PCI Adapter