IBM IntelliStation POWER 9114 Model 275 Manual To The Installation page 43

1 System Unit - Top View in
Service Position
2 SCSI Single-Ended Cable
3 Media-Bay-Chassis Backplane
4 SCSI Media Device
1 System Unit (Side View in
Service Position)
2 DVD-RAM Cable (SCSI
Media-Device )
3 SCSI Media-Device Power
Cable
4 SCSI Media-Device SCSI Cable
5 DVD-RAM Cable (Slimline
Media-Device )
6 PCI Adapter Slots
Replacing SCSI Media-Device Cables
To replace a SCSI media-device cable, do the following:
1. Identify the cable you want to replace.
2. Plug the cable into the appropriate connectors on the SCSI media device and on the media bay
chassis or audio card. If you are replacing the audio-card cable, ensure that the cable is routed
through the system properly.
3. Replace the SCSI media device as described in "Replacing the Media Bay Chassis" on page 39.
1
1 2 3
11
10
9
8
7
Chapter 2. Removal, Replacement, and Installation Procedures
2
3
6
7
5 Disk Drive Bay
6 Audio Card Cable
7 PCI Adapter Slots
5
4
6
7 Audio-Card Cable
8 Media Bay-Chassis Backplane
9 Operator Panel or Filler
10 Slimline Media Devices
11 SCSI Media Device
4
5
31