Table of Contents
Advertisement
SECTION 7
7.1 Clock Description
7.2 Setting Hours and Minutes
7.3 Setting the Month and Day
7.4 Setting the Year
7.5 Displaying Current Time
INSTRUMENT CLOCK
The 2100AN Instrument contains a battery-backed, real-time clock. This feature
provides a time-date stamp on all data transmitted to the internal printer or to
external devices via the RS232 Interface. Time and dated measurements,
calibration records, instrument setup data and diagnostic records are recorded
and maintained easily using this feature.
1. Enter the setup mode by pressing
2. Select the number
05
press
.
ENTER
3. Set the hours and minutes (
Press
to accept the new setting.
ENTER
4. Press
to exit the setup mode. Pressing
SETUP
accepting the new value, exits the setup mode leaving original values intact.
1. Enter the setup mode by pressing
2. Select the number
using the edit keys followed by
06
day (
) using the edit keys.
MM-DD
3. Press
to accept the new setting.
ENTER
4. Press
to exit the setup mode. Pressing
SETUP
accepting the new value, exits the setup mode leaving original values intact.
1. Enter the setup mode by pressing
2. Select the number
07
3. Set the year (
) using the edit keys. Press
YY
4. Press
to exit the setup mode. Pressing
SETUP
accepting the new value, exits the setup mode leaving original values intact.
1. Enter the setup mode by pressing
2. Select the number
08
is displayed (
HH-MM-SS
3. Press
to display the time. Press
ENTER
75
. The mode display will flash.
SETUP
using the up, down and right arrow (edit) keys, then
) using the edit keys (24 hour format).
HH-MM
UNITS/EXIT
. The mode display will flash.
SETUP
UNITS/EXIT
. The mode display will flash.
SETUP
using the edit keys followed by
ENTER
UNITS/EXIT
. The mode display will flash.
SETUP
using the edit keys, then press
).
SETUP
at any time, prior to
. Set the month and
ENTER
at any time, prior to
.
ENTER
to accept the new setting.
at any time, prior to
. The current time
ENTER
to exit.
Hide quick links:
Advertisement
Table of Contents
