Table of Contents
Advertisement
im Vertrieb von
Remote Control, cont'd
Controls area
The controls area, figure 4-10, consists of four tabs, Control, Preset, Picture, and
Advanced, that allow you to perform many of the same functions as the PIP's front
panel.
Figure 4-10 — Controls area, Control tab
Control tab
Figure 4-10 shows the controls area with the Control tab selected.
•
•
•
•
•
www.camboard.de
4-16
PIP 422 and PIP 444 Picture-in-Picture Processors • Remote Control
CAMBOARD Electronics
Windows Enable — Select and deselect a window for display by clicking the
associated window's button. A button appears green when selected and the
window appears in the graphic area of the screen. A button appears gray
when deleselected and the window does not appear in the graphic area.
Freeze Window — Select and deselect an input to freeze or unfreeze that
input's window in the displayed image. A button appears red when selected
(that input is frozen) and appears gray when deselected (the input video is in
motion).
Window Priorities — Select a window button and click the <<Front and
Back>> buttons to reorder the window priorities. The highest priority
window is to the left and the lowest priority window is to the right.
Front Panel Lockout — Select the Disable or Enable radio button to unlock
(Disable) or lock (Enable) the front panel.
Swap (PIP 422 only) — Click the Swap button to exchange the size, position,
and priority information between windows 1 and 2.
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de
Advertisement
Table of Contents
