Table of Contents
Advertisement
im Vertrieb von
Operation, cont'd
Input Configuration menu
Figure 3-5 is a flowchart that shows an overview of the Input Configuration menu
and the available settings.
Figure 3-5 — Input Configuration menu flowchart
The Input Configuration menu consists of one submenu that allows you to select
the type of video signal that each of the four inputs will pass. You can configure
each input to accept Video (composite video), S-video, or YUV (component video).
Rotate the Adjust
video signal type.
www.camboard.de
3-6
PIP 422 and PIP 444 Picture-in-Picture Processors • Operation
CAMBOARD Electronics
Default
Cycle
Menu
NOTE
The PIP returns to
the last active main
menu or submenu
when you press Menu.
Input
Config
Menu
Output
Config
Menu
Advanced
Config
Menu
Genlock
Config*
Menu
Menu
To exit menu
press NEXT
Next
knob to select the input and the Adjust
Only one video format can be assigned to each input.
Tel. 07131 911201
Fax 07131 911203
20 sec.
20 sec.
Next
Input #1 Fmt
Next
Video
Input#
Input video type
• Input #1
• Video* (Composite)
• Input #2
• S-video
• Input #3
• YUV (Component)
• Input #4
(* Default)
(Or push the Window
Select button.)
WINDOW
SELECT
1 2
3 4
*PIP 444 only
knob to select the
ce-info@camboard.de
Advertisement
Table of Contents
