Genie S-65 XC CE Operator's Manual Supplement page 12

Operator's Manual Supplement
Software Update
7 Press Escape / Escape / Escape.
8 Push in the red Emergency Stop button to the
off position.
9 Perform a zero load platform calibration. Refer
to Repair Procedure, How to Perform a Zero
Load Platform Calibration in the Service and
Repair manual that is appropriate for your
machine.
10 Perform function test. Refer to the Operator's
Manual located on your machine.
Note: This step is only required if the machine
software has been updated.
11 Return the machine to service.
12 4m Platform
First Edition • Third Printing
Part No. 1295772GT