Omron Max Power Relief PM500 Instruction Manual page 18

STEP 4 – REMOVE AND DISCARD PLASTIC FILM FROM PADS
Remove the clear plastic film from the back of the pad.
Discard the plastic film backing as well as the clear packaging.
Remove plastic film and put sticky side of pads on either
side of the pad holder.
STEP 5 – ATTACH THE UNIT TO THE BELT CLIP
CAUTION
• The clip may fall off if attached to soft or thin clothing.
7. ASSEMBLY STEPS
STORING PADS ON PAD HOLDER
18
pad facing down
Pad Holder
pad sticky side up