Omron Max Power Relief PM500 Instruction Manual page 10

4. IMPORTANT SAFETY PRECAUTIONS AND WARNINGS
• Do not bend or fold the pads because the gel may get damaged and it won't stick or
function properly.
• To avoid damage to the adhesive surface of the pads, put the pads only on the skin or
on the plastic pad holder provided.
• Always place clean pads in accordance with illustrations provided (Refer to pages
19-22, Pad Placement).
• Do not apply ointment or any solvent to the pads or to your skin because it will disrupt
the pads from functioning properly. The self-adhesive pads will adhere to your skin.
• Do not add spray, lotions or creams to skin or pads.
• Place pads on each side of the pain, not directly on the pain.
• Place pads at least 1 inch (3 cm) apart for optimal results.
CAUTION WHILE USING UNIT
MAIN UNIT
• If the unit is not functioning properly or you feel discomfort, immediately stop using
it.
• Do not use for any other purpose except for what it is intended.
• Do not place in a room with high humidity, such as a bathroom. This will damage
the unit. Ideal temperature for using 50 °F - 104 °F (10 °C - 40 °C), 30 - 80 % relative
humidity.
• Do not use the unit without proper lighting. You may not be able to operate unit
successfully.
• While using this device, make sure that no mobile phone or any other electrical devices that emit
electromagnetic fields is within 12 inches (30 cm). This may result in poor performance of the
device.
• Do NOT turn unit on until pads are on your skin.
CORD
• Do not insert the electrode plug into any place other than the jack on the unit.
• Do not pull on the electrode cord during treatment.
• Do not bend or pull the end of the cord.
• When pulling out the cord from the unit, hold the plug and pull.
• Replace the cord when broken or damaged.
10