Facsimile Mode; Changing To Facsimile Mode; Sending A Fax; Printing A Received Fax - Ricoh Aficio 1015 Operating Instructions Manual

Facsimile Mode

Changing to Facsimile Mode

You can always use the machine for
faxing when you are not using a scan-
ner.
A
Press the { { { { Facsimile} } } } key.
The fax display appears on the
panel display.
Note
❒ The Memory Transmission/Re-
ception function is performed
automatically even when an-
other function is being used.
You need not to switch the dis-
play. When data is received in
memory, the Receive File indi-
cator is lit.
Reference
For details, see the Facsimile
Reference manual.

Sending a Fax

Sending a fax while copying
A
Press the { { { { Facsimile} } } } key to switch
to the fax display.
Note
❒ When you press the {Facsimile}
key while scanning originals or
sorting in Copy mode, remove
any originals of your copy job.
B
Complete the usual operations
for sending a fax, then press the
{ { { { Start} } } } key.
C
After the transmission has fin-
ished, press the { { { { Copy} } } } key.
D
Reset the copy job originals, then
press the { { { { Start} } } } key.
The machine resumes the inter-
rupted copy run.
Sending a fax while printing
A
Press the { { { { Facsimile} } } } key to switch
to the fax display.
B
Complete the usual operations
for sending a fax, then press the
{ { { { Start} } } } key.

Printing a Received Fax

When you are not copying, a received
fax is printed automatically. You do
not need to switch to Facsimile mode.
Note
❒ Machine operations are different
depending "11Print Priority" (See
P.16 "System Settings") or "13Key
Op. Tools" (See P.16 "System Set-
tings") settings.
Facsimile Mode
1
9