Setting A Broadband Router - Kenwood TS-990S Setting Manual

For details, refer to "Allocating DATA SEND Function to PF Keys".

4.5. Setting a Broadband Router

When implementing KNS operations via the Internet, it is necessary to set the
broadband router connected to the host station.
Perform the settings to transmit control data signals and audio transmissions
via the Internet from the broadband router to the host station PC.
This setting depends on the call method of the broadband router manufacturer,
and may be "Port forwarding", "IP masquerade", "Port conversion", "NAT
address conversion", etc. Refer to the user's manual for the broadband router
used.
The settings are described below.
Control data signals
Item (Example)
Open IP address
Protocol
Port Number
Direction
Audio transmissions
Item (Example)
Open IP address
Protocol
Port Number
Direction
Caution:
 For the broadband router settings, refer to the broadband router user's
manual.
 Incorrect broadband router settings may stop the network or enable
illegal external access to the network. Take thorough precautions when
changing the settings.
 JVC KENWOOD Corporation does not offer support for customer PCs and
networks.
Setting Details
IP address of the PC used in the host
station
TCP
50000 (default value)
Two-way
Setting Details
IP address of the PC used in the host
station
UDP
33550 (default value)
Two-way
17