Objectives Of This Document - Kenwood TS-990S Setting Manual

2. Objectives of this document

To supply information to configure a remote control system via a home LAN or
Internet using the TS-990S, ARCP-990, ARHP-990 and VoIP Program.
Programs and Functions
ARCP-990
ARHP-990
VoIP Program
Requirements
Programs used
Transmits and
receives audio
Network
IP address used
Application based
on the Radio Act
Functions
Operates transceiver
remotely
Receives the display data
from the transceiver, and
sends it over the network to
the ARCP. Also receives
control data sent from the
ARCP, and sends it to the
transceiver.
Transmits and receives
audio between the host
station and the remote
station.
Via Internet
ARCP-990
ARHP-990
VoIP Program
Requires VoIP Program.
(The VoIP feature that is
built into the ARCP-990 and
ARHP-990 cannot be used.)
Connection via the Internet
(To use the Internet, a
contract with a provider is
necessary.)
Global IP address
Application using the
Internet
Remote Station
Host Station
Remote Station
Host Station
ARCP-990
ARHP-990
Use the VoIP feature that is
built into the ARCP-990 and
ARHP-990. Or use a VoIP
Program.
Connection using a home
LAN
Local IP address
Application using a home
LAN
3
Location
Home LAN