Settings For Loaded Media - Epson SC-F9400H Series Operator's Manual

SC-F9400H Series/SC-F9400 Series Operator's Guide
F
Hold down the d button until the media is taken
up and wrap around the core once or twice.

Settings for Loaded Media

When you have finished loading the media, follow the
instructions on the control panel to make settings for
the loaded media.
1. Select the media setting number
Select the media setting number to which the print
settings have been registered.
2. Select the roll winding specifications
Select the roll type for the loaded media roll.
3. Set the media length
Set the length of the loaded media.
Basic Operations
Buttons that are used in the following settings
A
Use the d/u buttons to select the media setting
number to which the print settings have been
registered, and then press the Z button.
Select Media
1
2
3
4
5
OK
If media settings have not yet been made for new
media, select an unassigned number, finish
loading the media, and then perform Easy Media
Setup.
Making Media Settings U User's Guide (Online
Manual)
B
Use the d/u buttons to select the roll type that
matches the loaded roll, and then press the Z
button.
Roll Type
Printable Side Out
Printable Side In
OK
23
Done
Done Back