Finishing Cleaning - Epson SC-F9400H Series Operator's Manual

SC-F9400H Series/SC-F9400 Series Operator's Guide
Points to note when cleaning caps
❏ Is there any lint attached to the inside of the
cap?
❏ Is there any lint attached to the flushing pad?
If they are not dirty, cleaning is complete.
"Finishing Cleaning" on page 38
U
If they are dirty, see the following sections and
perform the necessary cleaning.
When there is lint or dust in the cap
Remove using the tip of the cleaning stick or tweezers.
If no other parts need to be cleaned, proceed to the
following section.
"Finishing Cleaning" on page 38
U
When there is lint attached to the
flushing pad
Wipe off lint and dust with the tip of a cleaning stick.
Maintenance
c
Important:
Do not deform the metal section of the top surface. If
they are deformed, they may damage the print head.
If no other parts need to be cleaned, proceed to the
following section.
"Finishing Cleaning" on page 38
U

Finishing Cleaning

After cleaning is complete, close the right-side
maintenance cover and press the Z button.
The menus will close when the print head returns to its
normal position.
To continuously make prints, perform Nozzle Check.
U User's Guide (Online Manual)
Disposing of used ink cleaner, cleaning sticks, and
clean-room wipers U
on page 52
38
"Disposal of used consumables"