Epson SC-F9400H Series Operator's Manual page 11

SC-F9400H Series/SC-F9400 Series Operator's Guide
I
Firmly insert the roll core of the media onto the
roll holder.
Note:
If the roll of media has an outer diameter that is less
than 140 mm, the roll core will not reach the roll
holder when raised using the lift lever.
Raise it with your hands, and insert the roll core
into the roll holder.
J
Basic Operations
K
Note:
If the roll of media has an outer diameter that is less
than 140 mm, the roll core will not reach the roll
holder when raised using the lift lever.
Raise it with your hands, and insert the roll core
into the roll holder.
L
To ensure that the roll holder is sufficiently
inserted into the roll core, push the top of the roll
holder towards the end of the roll two times.
11