SC-F9400H Series/SC-F9400 Series Operator's Guide
B
Hold down the d button in the control panel to
feed enough media for a single wrap around the
take-up roll core.
C
Flip the Auto switch to Off and hold down the
Manual switch on the
media for a single wrap around the core.
Basic Operations
D
E
side to take-up the
20
Flip the Auto switch to
Confirm that the media is attached and is not
crooked.
If the tension on the left and right of the media
differ, such as in the areas circled in the
illustration below, the media will not be taken up
correctly. If one of the sides is loose, restart the
procedure from step 1.
.