SC-F9400H Series/SC-F9400 Series Operator's Guide
c
Important:
If the right-side roll holder handle shaft is not
visible, rotate the handle forward until it stops.
The media cannot be properly loaded if the
handle shaft is not visible.
E
Move the roll holder to the set position according
to the inner diameter of the roll of the media that
will be loaded.
F
While pressing from the top of the roll holder,
tighten the fixing screw until it no longer turns.
Tighten it so the roll holder does not move.
Basic Operations
G
Note:
The method of placing the roll media varies as
follows depending on how media is rolled.
Printable Side Out
Printable Side In
H
10