Yamaha CL3 Service Manual page 134

CL3/CL1
Example of individual check screen (when checking in automatic mode) (Fig. 3)
Indicated when
the total
judgment of all
individual items
is completed.
Check item
Judgment result
of each item
NO usually
appears when
there is no
communication
response.
-- Item of
damage, etc
** Item requiring
no judgment
Operation
instructions are
displayed in red
and processing
status in black.
Used to start checking.
During the checking, this button becomes
[CONTINUE] button and restarts checking
when pressed during temporal stop.
AutoNext function
While each individual checking is executed, the screen as shown in Fig.3 above is displayed.
The contents communicated with the CL itself being checked is displayed on the right side of the screen and the result can be stored as a
fi le. (Max. 30 KB)
Use "Store fi le name.txt" for the fi le name.
c. Common items for checking
1) When there is no communication response in individual judgment of each test, "Communication error" appears and the individual
judgment is NG.
2) With some items the number of NGs for one check item should be up to as many as 20.
• End of checking
With the application program, the start-up screen appears when checking is over.
Turn off the power of the actual unit or tester.
Remove the actual unit.
* To continue checking, replace the actual unit, turn on the power and execute again from the start-up screen.
End the PC application program.
134
Used to close this screen and return to Fig. 2 screen.
temporal stop and pressing it will force to end checking.
Communication contents are
displayed while checking all
items.
by using the copy & paste
function.
When check result is NG,
details are displayed. (Output
from target CPU)
When there is TxData,
command being transmitted is
also displayed.
When there is OkData, OK: is
also displayed.
When checking visually, this box is
displayed.
The OK button and Enter key are linked.
When there is a check mark, OK and
data being transmitted are displayed
for debugging this PC program. (No
check mark when program is
started.)