Yamaha CL3 Service Manual page 133

Click the button of the item to be checked on the start-up screen, and each corresponding screen will appear (as shown in Fig. 2)
The service inspection screen is as shown on page 136.
Example of check screen (Fig. 2)
Used to clear total judgment
Total judgment
Used to select/not to select
automatic check item
Clicking this button starts
checking in manual mode.
Used to select all items Used to clear all items
1) Automatic mode:
When the [START] button at the bottom of the Fig. 2 screen is pressed, selected checking items will be executed sequentially from
the upper left downward. All judgment columns become blank when checking is started. If [STOP on NG] is pressed, checking is
stopped temporarily when judgment is NG.
Checking stops temporarily when [PAUSE] is pressed and stops when [STOP] is pressed during the temporal stop.
Checking is re-started when [CONTINUE] is pressed.
2) Individual mode:
If the button with OK/NG indication in Fig. 2 is pressed, an individual checking screen as shown in Fig. 3 will be displayed. Press
[START] in each screen to execute checking.
For the checking items and checking contents, refer to "List of Check Items" on page 135.
For the "items not subject to checking" in each checking screen their characters are dimmed (grayed out).
The fi le storing the checking results should be named as "Storage fi le name.csv". (Only total check results will be saved.)
Absolute bus name of check result storage file
Used to select Used to start automatic checking
NG items only While checking, this button works as the [CONTINUE]
button and restarts checking when it is pressed during
temporal stop.
Closes this screen to return
to Fig. 1 screen
Indicates version
Indicates MAC Address
Used to read saved check results
Used to store check result
When judgment is NG, item
name characters become red.
Judgment result of individual
check
(visual check etc.) is entered by
having OK/NG displayed in the
button and pressing it wile
checking.
non-selected items in automatic
check.
When each check result is NG,
used to select stop/not to stop
instruction.
(The stop instruction is not
applicable when the default
function is used.)
Used to stop checking temporarily.
Works as [STOP] during temporal stop and
pressing it will force to end checking.
CL3/CL1
133