Safety And Compliance; Electrical Safety And Compliance; Electrical Installation; Operating Environment - Comtech EF Data CRS-180 Installation And Operation Manual

70/140 mhz if 1:1 redundancy switch
Hide thumbs Also See for CRS-180:
Table of Contents

Advertisement

CRS-180 70/140 MHz IF 1:1 Redundancy Switch
Preface
CAUTION – You should carefully review the following information.

Safety and Compliance

Electrical Safety and Compliance

The unit complies with the EN 60950 Safety of Information Technology Equipment (Including
Electrical Business Machines) safety standard.
The equipment is rated for operation at ±12 volts DC. It has a maximum power consumption of
4.5 Watts, and draws a maximum of 250 mA at +12 volts DC and 120 mA at -12 volts DC. The
power supply current is, in all circumstances, supplied by either a single Comtech EF Data
modem, or a pair of these modems.
CAUTION – IF THE UNIT IS OPERATED IN A VEHICLE OR MOVABLE INSTALLATION,
MAKE SURE THE UNIT IS STABLE. OTHERWISE, EN 60950 SAFETY IS NOT GUARANTEED.

Electrical Installation

CAUTION – THIS SWITCH IS DESIGNED TO WORK WITH MODEMS THAT MUST BE
CONNECTED TO A POWER SYSTEM THAT HAS SEPARATE GROUND, LINE, AND
NEUTRAL CONDUCTORS. DO NOT OPERATE THE UNIT WITHOUT A DIRECT
CONNECTION TO GROUND.

Operating Environment

CAUTION – DO NOT OPERATE THE UNIT IN ANY OF THESE EXTREME OPERATING
CONDITIONS:
AMBIENT TEMPERATURES LESS THAN 0° C (32° F) OR MORE THAN 50° C (122° F).
PRECIPITATION, CONDENSATION, OR HUMID ATMOSPHERES OF MORE THAN 95%
RELATIVE HUMIDITY.
UNPRESSURIZED ALTITUDES OF MORE THAN 2000 METRES (6561.7 FEET).
EXCESSIVE DUST.
FLAMMABLE GASES.
CORROSIVE OR EXPLOSIVE ATMOSPHERES.
xiii
MN/CRS180.IOM
Revision 11

Advertisement

Table of Contents
loading

Table of Contents