Features - Siemens 7XV5662-0AA00/GG Directions For Use Manual

7XV5662-0AA00/GG

Features

The communication converter has the following features:
Synchronous:
Transmission rate for X. 21 64 Kbit/s, 128 Kbit/s, 256 Kbit/s or 512 Kbit/s usable.
Transmission rate for G.703.1 64 Kbit/s.
Asynchronous:
Asynchronous transmission rate of the data at X. 21
64 Kbit/s from 0.3 kBaud to 19.2 kBaud,
128 Kbit/s from 0.3 kBaud to 38.4 kBaud,
256 Kbit/s from 0.3 kBaud to 57.6 kBaud,
512 Kbit/s from 0.3 kBaud to115.2 kBaud.
Asynchronous transmission rate of the data at G.703.1 from 0.3 kBaud to 19.2 kBaud.
General:
Automatic determination of the baud rate for X.21 and G.703.1.
Switchover between synchronous and asynchronous data interchange selectable via
pushbutton.
Connection about fibre optic cable to a FO module integrated there.
Maximum fibre optic cable length for the connection protection device ↔ communication
converter 1.5 km with 62.5 µm/125 µm multi-mode fibres. Connection with ST plug.
Connection to the communication device over 15-pole DSUB plug (X.21) or 9-pole DSUB
socket (G.703.1).
Wide area power supply for
Direct voltage 24 V to 250 V.
Alternating voltage 110 V to 230 V.
Supervision of the auxiliary voltage, the timing signal of the communications network and
the internal logic.
Rigid steel-plate housing with the measures of 188 mm x 120 mm x 56 mm (WxDxH) for
DIN rail mounting.
Signaling the operating states via LED.
Power consumption < 9,5 VA, 2,5 W.
C53000-B1174-C134-8
English
37