Using the Optional Automatic Document Feeder
The optional Automatic Document Feeder can be used to make
copies of multiple pages automatically. Even with the Automatic
Document Feeder mounted, you can still make single copies using
the Document table.
Loading paper into the Automatic Document Feeder
The Automatic Document Feeder can automatically load up to 20
sheets of the following paper sizes (based on a paper weight of
17lbs and stack thickness of 4.0 mm or less):
Checks 83 × 127 mm
B5
A4
Letter
Note:
When you are using the Automatic Document Feeder, the number of
Copies will be automatically set to one even if you have a multi-page
original document. You cannot change the Copies setting.
Follow the steps below to load paper into the Automatic
Document Feeder.
Note:
Make sure no documents or dust are on the document table when using
the Automatic Document Feeder. Dust on the document table near the
scan carriage home position may result in vertical lines on copied images.
182 × 257 mm
210 × 297 mm
215.9 × 279.4 mm
9-9
Copier