Epson STYLUS SCAN 2500 User Manual page 149

To print your scanned document when Resolution is set to
Drawing/Halftone, select the same resolution setting from the
list as you select in the printer driver. To print your scanned
document when Resolution is set to Photo, select a resolution
between 150 and 300 dpi. If you select higher resolution, the
Photo setting requires longer to print, but does not improve
the output quality.
The Resolution setting is closely related to the Image Size and
Scale settings. If you change them arbitrarily, the resulting
image may not be what you expected.
The range of resolution values depends on your Stylus Scan.
To apply the settings you made, click OK. To cancel the settings,
click Cancel.
To save the settings you made, type a new name in the
Destination Name box, and then click Save.
To delete a Destination setting, select the target setting name to
be deleted in the Destination Name menu, then click Delete.
Unsharp Mask
You can select or deselect the Unsharp Mask setting. Selecting this
check box improves image sharpness.
8-50
Scanner