Setting Up Epson Scanner Monitor - Epson STYLUS SCAN 2500 User Manual

Suppress TWAIN User Interface check box
When this check box is selected, the EPSON TWAIN dialog box
does not appear when you scan, and the scanner works according
to the settings in PageManager. When this check box is cleared,
the EPSON TWAIN dialog box appears when you scan, and the
scanner works according to the settings in EPSON TWAIN.
Enable Document Feeder check box
When this check box is selected, the scanner feeds your
documents though the Automatic Document Feeder. When this
check box is cleared, the scanner scans your documents from the
document table.
Note:
To remove applications from the Scan Buttons bar, select the icon of the
application you want to remove in the box on the left of the dialog box,
then click Remove.

Setting up EPSON Scanner Monitor

EPSON Scanner Monitor is software that recognizes when the
Scan button is pressed and sends information to assigned
application software supporting the Scan Button feature and
EPSON Scanner Monitor, such as EPSON SMART PANEL or
PageManager for EPSON.
Once EPSON TWAIN is installed on an operating system, EPSON
Scanner Monitor is active and identifies EPSON SMART PANEL
as the application that allows you to use the Scan Button feature.
If you need to turn off Scanner Monitor, or select another
application that supports the Scan Button feature, access Scanner
Monitor as described below.
Note:
Application software other than EPSON SMART PANEL or
PageManager for EPSON which supports both EPSON Scanner
Monitor and the Scan button feature may be limited.
8-14
Scanner
]