Epson STYLUS SCAN 2500 User Manual page 118

1. Select your scanner from the installed scanners and cameras
list in the Scanners and Cameras Properties dialog box.
Click Properties, and then click the Events tab.
2. You can see the Scan Button is listed as the scanner event.
Make sure the check box of the application you want to assign
]
to the Scan button is selected and all other application
check boxes are clear in the Send to this application list.
Note:
If more than one application is selected, a dialog box appears
prompting you to select an application when the Scan button
is pressed.
Some applications do not support linkage to scanners and
digital cameras. Linkage is available only with the applications
that appear in the Send to this application list.
3. Close the dialog box by clicking the OK button.
8-19
Scanner