Toyota RAV 4 2019 Manual page 426

426
5-4. Other settings
Setting the valet mode
The security system can be set
to on by entering a security code
(4-digit number).
When set to on, the system will
become inoperative once the
electrical power source is dis-
connected until the security
code is entered.
1
Display the vehicle settings
screen. (P.425)
2
Select "Valet Mode".
3
Enter the 4-digit personal
code and select "OK".
4
Enter the same 4-digit per-
sonal code again and select
"OK".
 The system will request that
you input the security code
again to confirm that you
remember it correctly.
 When valet mode activates,
the system stops and a secu-
rity code (4-digit number)
standby screen is displayed.
● If the 4-digit personal code is for-
gotten, please contact your Toyota
dealer.
If the valet mode has been
activated
1
Enter the 4-digit personal
code and select "OK".
● If an incorrect security code (4-
digit number) is entered 6 times,
the system will not accept another
security code (4-digit number) for
10 minutes.