364
4-5. Using the driving support systems
Symptom
The image is difficult to
see
The image is blurry
The image is out of
alignment
The guide lines are very
far out of alignment
Likely cause
The vehicle is in a
dark area
The temperature
around the lens is
either high or low
The outside tempera-
ture is low
There are water drop-
lets on the camera
It is raining or humid
Foreign matter (mud,
etc.) is adhering to the
camera
Sunlight or headlights
are shining directly
into the camera
The vehicle is under
fluorescent lights,
sodium lights, mer-
cury lights, etc.
Dirt or foreign matter
(such as water drop-
lets, snow, mud, etc.) is
adhering to the camera.
The camera or sur-
rounding area has
received a strong
impact.
The camera position is
out of alignment.
The vehicle is tilted.
(There is a heavy load
on the vehicle, tire
pressure is low due to
a tire puncture, etc.)
The vehicle is used on
an incline.
Solution
Back up while visually
checking the vehicle's
surroundings. (Use the
monitor again once con-
ditions have been
improved.)
The procedure for
adjusting the picture
quality of the pan-
oramic view monitor
system is the same as
the procedure for
adjusting the screen dis-
play. (P.400)
Flush the camera with a
large quantity of water
and wipe the camera
lens clean with a soft
and wet cloth.
Have the vehicle
inspected by your Toy-
ota dealer.
Have the vehicle
inspected by your Toy-
ota dealer.
If this happens due to
these causes, it does
not indicate a malfunc-
tion.
Back up while visually
checking the vehicle's
surroundings.