Toyota RAV 4 2019 Manual page 110

110
2-1. Instrument cluster
"Energy monitor":
Select to enable/disable the Energy
monitor (P.111)
"AWD":
Select to enable/disable the AWD
system display (P.106).
• "Drive Info Type"
Select to change the drive informa-
tion type display between trip and
total. (P.106).
• "Drive Info Items"
Select to set the items on the upper
and lower side of the drive informa-
tion screen. from three items, aver-
age speed, distance and total time.
 "Trip Summary"
Select to set the items displayed
when the power switch is turned off.
 "Pop-Up Display"
Select to enable/disable the follow-
ing pop-up displays, which may
appear in some situations.
• Intersection guidance display of
the navigation system-linked sys-
tem (if equipped)
• Incoming call display of the
hands-free phone system
• Audio operation
• Volume operation
• Voice control
 "MID OFF"
A blank screen is displayed.
 "Default Settings"
Select to reset the meter display
settings.
■ Suspension of the settings dis-
play
● In the following situations, opera-
tion of the settings display will be
temporarily suspended.
• When a warning message
appears on the multi-information
display
• When the vehicle begins to move
● Settings for functions not
equipped to the vehicle are not
displayed.
● When a function is turned off, the
related settings for that function
are not selectable.
WARNING
■ Cautions during setting up
the display
As the hybrid system needs to be
operating during setting up the
display, ensure that the vehicle is
parked in a place with adequate
ventilation. In a closed area such
as a garage, exhaust gases
including harmful carbon monox-
ide (CO) may collect and enter
the vehicle. This may lead to
death or a serious health hazard.
NOTICE
■ During setting up the display
To prevent 12-volt battery dis-
charge, ensure that the hybrid
system is operating while setting
up the display features.
Warning message display
Select to display warning mes-
sages and measures to be
taken if a malfunction is
detected. (P.642)