Lexus RX450H Manual page 350


When connecting and disconnecting a trailer (vehicles with electrically
modulated air suspension)

Connecting
STEP 1
Set the electronically modulated air suspension to LO mode.
STEP 2
Press the height control off switch to turn off the electronically
modulated air suspension.
STEP 3
Turn off the "POWER" switch
STEP 4
Connect the trailer.
STEP 5
Turn on the "POWER" switch
STEP 6
Press the height control off switch again to turn on the electroni-
cally modulated air suspension.
STEP 7
Set the electronically modulated air suspension to N mode.

Disconnecting
STEP 1
Set the electronically modulated air suspension to LO mode.
STEP 2
Press the height control off switch to turn off the electronically
modulated air suspension.
STEP 3
Turn off the "POWER" switch
STEP 4
Set the supporting leg of the trailer on the ground and raise the
hitch by 100 mm (4 in.)
STEP 5
Turn on the "POWER" switch
STEP 6
Press the height control off switch again to turn on the electroni-
cally modulated air suspension.
STEP 7
Wait until vehicle height is stabilized.
Make sure the hitch is disconnected. If the hitch does not disconnect, raise
the hitch higher and repeat steps 2 through 7.
RX450h_EE
2-5. Driving information
2
325