Lexus RX450H Manual page 115

1-4. Adjustable components (seats, mirrors, steering wheel)

Canceling the linked door unlock operation
STEP 1
Turn the "POWER" switch to ON mode and close the driver's door.
STEP 2
While pressing the "SET" button, press the driver's door lock
switches (either lock or unlock) until the signal beeps.

Operating the driving position memory after turning the "POWER" switch
off
Memorized positions (except for the steering wheel position) can be acti-
vated up to 180 seconds after the driver's door is opened and another 60 sec-
onds after it is closed again, even after turning the "POWER" switch off.

Stopping seat position operation part-way through
Perform any of the following operations:

Press the "SET" button.

Press button "1", "2" or "3".

Adjust the seat using the switches (only cancels seat position recall).

Adjust the steering wheel using the tilt and telescopic steering control
switch (only cancels steering wheel position recall).

Correct seat position
When the seat is in the most forward or most backward position, and the
seat is being moved in those directions, the system may not correctly recog-
nize the current position and the memorized position will not be correctly
recalled.

The auto away function for exiting the driver seat
If the seat is already close to the rearmost position, the auto away function
may not operate when the driver exits the vehicle.

Customization
The distance that the driver's seat moves backward during the auto away
function can be changed. (Customizable features P. 640)
CAUTION

Seat adjustment caution
Take care during seat adjustment so that the seat does not strike the rear pas-
senger or squeeze your body against the steering wheel.
RX450h_EE
1
107