Lexus RX450H Manual page 251

2-2. Instrument cluster

Average fuel consumption
Displays the average fuel consumption since the function was
reset
• The function can be reset by pushing the "ENTER" switch for lon-
ger than one second when the average fuel consumption is dis-
played.
• Use the displayed average fuel consumption as a reference.

Average vehicle speed
Displays the average vehicle speed since the function was reset
The function can be reset by pushing the "ENTER" switch for longer
than one second when the average vehicle speed is displayed.

Cruising range
Displays the estimated maximum distance that can be driven
with the quantity of fuel remaining
• This distance is computed based on your average fuel consump-
tion. As a result, the actual distance that can be driven may differ
from that displayed.
• When only a small amount of fuel is added to the tank, the display
may not be updated.
When refueling, turn the "POWER" switch off. If the vehicle is
refueled without turning the "POWER" switch off, the display
may not be updated.

Tire inflation pressure (if equipped)
Displays inflation pressure of each tire. There is no correlation
between the order of the displayed values and the tire positions.
If the inflation pressure of any tire drops a certain amount below the
tire inflation pressure value currently memorized in the system, the
displayed values will be highlighted.
It may take a few minutes to display the tire inflation pressure after the
"POWER" switch is turned to ON mode. It may also take a few min-
utes to display the tire inflation pressure after inflation pressure has
been adjusted.
If the tire pressure warning light is on or flashing, a message describ-
ing the situation will be displayed.
228
RX450h_EE