Lexus RX450H Manual page 176

1-8. Safety information
Key of letters inserted in the above table:
U: Suitable for "universal" category child restraint system
approved for use in this mass group.
UF: Suitable for forward-facing "universal" category child
restraint system approved for use in this mass group.
L: Suitable for child restraint system shows in child restraint sys-
tem list.
X: Not suitable seat position for children in this mass group.
1
* : Adjust the front seatback to the most upright position. Move the front
seat to the rearmost position.
If the head restraint interferes with your child restraint system, and
the head restraint can be removed, remove the head restraint.
If the passenger seat is equipped with a vertical height adjuster, it
must be placed in the uppermost position.
Follow these procedures:
• For installing a baby seat with support base
If the baby seat interferes with the seatback when latching the baby
seat into the support base, adjust the seatback rearward until there is
no interference.
• For installing a forward-facing child seat
If there is gap between the child seat and the seatback, tilt the seat-
back rearward until good contact is achieved.
If the seat belt shoulder anchor is ahead of the child seat belt guide,
move the seat cushion forward.
• For installing a junior seat
If the child in your child restraint system is in a very upright posi-
tion, adjust the seatback to the most comfortable position.
If the seat belt shoulder anchor is ahead of the child seat belt guide,
move the seat cushion forward.
2
* : If the head restraint interferes with your child restraint system, and
the head restraint can be removed, remove the head restraint.
The child restraint system mentioned in the table may not be avail-
able outside of the EU area.
166
RX450h_EE