Lexus RX450H Manual page 278

STEP 2

Adjusting the set speed
To change the set speed, operate the lever until the desired set
speed is displayed.
In the vehicle-to-vehicle distance control mode, the set speed will
be increased or decreased as follows:
When the set speed is shown in "MPH"
By approximately 8 km/h (5 mph) each time the lever is operated
When the set speed is shown in "km/h"
By approximately 5 km/h (3.1 mph) each time the lever is operated
RX450h_EE
2-4. Using other driving systems
Accelerate or decelerate the
vehicle to the desired speed,
and push the lever down to
set the speed.
"SET" will be displayed.
The vehicle speed at the
moment the lever is released
becomes the set speed.
Increases the speed
Decreases the speed
Fine adjustment: Momentar-
ily move the lever in the
desired direction.
Large adjustment: Hold the
lever in the desired direction.
2
255