4: Shortcuts To Operating Functions; Introduction To The Control Panel - Honeywell Notifier NFS2-640/E Programming Manual

General Information
AFM-16A Annunciator Fixed Module Manual
ACM-8R Annunciator Control Module Manual
LCD-80 Manual
LCD2-80 Manual
FDU-80 Remote Annunciator Manual
LDM Series Lamp Driver Annunciator Manual
SCS Smoke Control Manual (Smoke and HVAC Control Station)
FireVoice-25/50ZS & FireVoice 25/50ZST Manual
FirstCommand Emergency Communication System
RPT-485W/RPT-485WF EIA-485 Annunciator Loop Repeater Manual
DPI-232 Direct Panel Interface Manual
TM-4 Installation Document (Reverse Polarity Transmitter)
UDACT Manual (Universal Digital Alarm Communicator/Transmitter)
UDACT-2 (Universal Digital Alarm Communicator/Transmitter) Listing Document
UDACT-2 Manual (Universal Alarm Communicator/Transmitter)
ACT-2 Installation Document
RM-1 Series Remote Microphone Installation Document
RA100Z Remote LED Annunciator Installation Document
1.2.4 Shortcuts to Operating Functions

1.3 Introduction to the Control Panel

The NFS2-640 is an intelligent, field-programmable Fire Alarm Control Panel. Field-programming
the control panel lets you customize the fire alarm system by selecting and setting program options
for intelligent/addressable detectors and modules, and Notification Appliance Circuits (NACs).
This manual provides information for programming using the NFS2-640 keypad connected to the
control panel. VeriFire™ Tools must be used for programming if no keypad is used, or if a network
control annunciator is used as the keypad in either a network or standalone application. Refer to
VeriFire™ Tools for information on programming without the NF2S-640 keypad, and the NF2S-
640 Installation Manual and NCA-2 Manual for installation information.
For details on control panel operation, refer to the NFS2-640 Operations Manual.
The NF2S-640 provides two methods for field-programming the control panel:
• Using the built-in "Program Change" interface
• The VeriFire™ Tools Programming Utility
10
Table 1.3 Related Documentation (2 of 2)
To the left of each program function, you'll find a keypad shortcut, which contains
a series of keypad entries required to access the program function. All shortcuts
start with the control panel in normal operation.
For example, the keypad shortcut to the left shows how to enter the Read Status
function with the control panel in normal operation.
Introduction to the Control Panel
15207
15342
15037
53242
51264
15885
15712
52290
LS10001-001NF-E
15640
51499
51490
50050
54089LD
54089
51118
51138
I56-0508
NFS2-640/E Programming Manual — P/N 52742:L2 7/17/14