Speed Limiter; Enabling The Device - Fiat 500 C Owner's Handbook Manual

SPEED LIMITER

(for versions/markets, where provided)
This device allows the speed of the
vehicle to be limited to values which
can be set by the driver.
The maximum speed can be set both
with vehicle stationary and in motion.
The minimum speed that can be set is
30 km/h.
When the device is active, the vehicle
speed depends on the pressure at the
accelerator pedal, until the
programmed speed limit is reached
(see "Speed limit programming"
paragraph).

ENABLING THE DEVICE

To enable the device, turn the ring C
(fig. 92) to the position.
92
When the device is enabled, it is
indicated by the
shown on the display along with the
last speed set (fig. 93, 94).
93
94
DVDF0S0210c
SPEED LIMIT
PROGRAMMING
symbol being
Enable the speed limiter by turning the
ring C to the
The speed limit can be programmed
without necessarily activating the
device.
To store a speed value higher than that
displayed.
Turn the ring B fig. 92 upwards
(SET + position). On releasing the ring
B, the speed increments by 1 km/h.
Holding it in the SET + position, the
speed continuously increments in steps
DVDF0S0224c
of 5 km/h.
To store a speed value lower than that
displayed.
Turn the ring B downwards
(SET- position). On releasing the ring B,
the speed decrements by 1 km/h.
Holding it in the SET - position, the
speed continuously decrements in
steps of 5 km/h.
DVDF0S0214c
position.
123