Fiat 500 C Owner's Handbook Manual page 91

In the upper part: information on the
track being played and the following
graphic buttons:
❒ "Repeat": to repeat the track being
played;
❒ "Shuffle": to play the tracks in
random order.
In the middle: information on the
track being played.
On the left: display of the following
buttons:
❒ Selected device or audio source;
❒ "Select source": select the required
audio source.
On the right: display of the following
buttons:
❒ "Info": additional information on the
track being played;
❒ "Tracks": list of available tracks.
❒ "Map": navigation map view
(Uconnect™7" HD Nav LIVE
versions only).
At the bottom: information on the
track being played and the following
graphic buttons:
Active device or audio source;
❒
÷ ˜
/ : select previous/next
track;
I I
❒
: pause track being played;
❒ "Audio": access to the "Audio
Settings" screen.
Track selection (Browse)
The "Tracks" function allows you to
open a window with the list of tracks
being played.
The choices available depend on the
device connected.
For example, on a USB device, you
can also use the SCROLL TUNE
button/knob to browse the list of
artists, genres and albums available on
the device, depending on the
information available on the tracks.
NOTE This button may be disabled for
some Apple® devices.
Turn the SCROLL TUNE button/knob
to select the desired category and then
press it to confirm the selection.
NOTE The "Tracks" button does not
allow any operation on the AUX device
(where provided).
NOTE The indexing time of a USB
device can vary according to the
media inserted (in some cases it can
take a few minutes).
Bluetooth® SOURCE
This mode is activated by pairing a
Bluetooth® device containing music
tracks with the system.
PAIRING A Bluetooth®
AUDIO DEVICE
To pair a Bluetooth® audio device,
proceed as follows:
❒ activate the Bluetooth® function
on the device;
❒ press the "Media" button on the
display;
❒ press the "Select Source" button;
❒ select the Bluetooth® Media
source;
❒ press the "Add Device" graphic
button;
89